D5-MIB

All MIBs › D5-MIB

Category: Cabletron / Enterasys ATM & WAN

Description: Manages D5 platform device configuration, status, and fault reporting objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is D5-MIB?

D5-MIB appears to be an enterprise product-registration MIB associated with the D5 platform product family, including product lines named symplex, datamizerHseries, directrouteSeries, directroute4Series, and datamizerVseries. The sample objects provided are top-level registration/product-identification OID arcs rather than runtime data leaves, meaning this module primarily exists to assign distinct sysObjectID-style identifiers to different hardware product variants. Because no runtime tables or scalar status objects were present in the supplied excerpt, it cannot be confirmed to expose live hardware/software health data such as uptime, temperature, or fault counters directly, though the short description suggests companion objects for configuration, status, and fault reporting may exist elsewhere in the module. Such product-registration structures are typically referenced by, and dependent on, standard MIB-II sysObjectID conventions so that a management station can identify device type from its registered OID. It would be deployed wherever D5-family devices (such as Datamizer or DirectRoute series products) are present, with D5-MIB SNMP monitoring used for product identification on a managed network.

IPNetwork Monitor allows you to monitor SNMP objects defined in D5-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D5 platform devices (Datamizer H/V-series, DirectRoute series)

Monitoring Examples

The supplied sample objects (symplex, products, datamizerHseries, directrouteSeries, directroute4Series, datamizerVseries) are OID registration arcs used to distinguish product variants, not monitorable runtime data, so no concrete polling scenario can be honestly constructed from them. An NMS would primarily use these identifiers to determine, via sysObjectID, which D5 product family a discovered device belongs to. Actual status/fault polling would depend on other tables not present in this excerpt.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

From RFC1213-MIB

ifIndex
ipAdEntAddr
snmp
sysDescr
sysUpTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF authenticationFailure	1.3.6.1.2.1.11.0.4			An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism.
INT callDataActvBandwidth	1.3.6.1.4.1.385.1.4.1.3.1.8	INTEGER	read-only	The speed in bps used for the connection.
STR callDataActvCurrTime	1.3.6.1.4.1.385.1.4.1.3.1.4	DisplayString	read-only	This field will return the current timestamp.
STR callDataActvDestSys	1.3.6.1.4.1.385.1.4.1.3.1.6	DisplayString	read-only	The System Name of the unit being called.
callDataActvEntry	1.3.6.1.4.1.385.1.4.1.3.1		not-accessible
STR callDataActvEstTime	1.3.6.1.4.1.385.1.4.1.3.1.3	DisplayString	read-only	The time that this call connected to the remote system.
INT callDataActvIndex	1.3.6.1.4.1.385.1.4.1.3.1.1	INTEGER	read-only	The index of this call event in the callDataTable.
STR callDataActvPhoneNum	1.3.6.1.4.1.385.1.4.1.3.1.7	DisplayString	read-only	The Phone Number used when the call was placed.
STR callDataActvReqTime	1.3.6.1.4.1.385.1.4.1.3.1.2	DisplayString	read-only	The time that this call was initiated.
STR callDataActvSourceSys	1.3.6.1.4.1.385.1.4.1.3.1.5	DisplayString	read-only	The System Name of the unit making the call.
INT callDataActvStatus	1.3.6.1.4.1.385.1.4.1.3.1.9	INTEGER	read-only	The current status of the call. (call active, call failed, etc.)
callDataActvTable	1.3.6.1.4.1.385.1.4.1.3		not-accessible	A list of active call entries.
INT callDataCompBandwidth	1.3.6.1.4.1.385.1.4.1.4.1.8	INTEGER	read-only	The speed in bps used for the connection.
STR callDataCompDestSys	1.3.6.1.4.1.385.1.4.1.4.1.6	DisplayString	read-only	The System Name of the unit being called.
callDataCompEntry	1.3.6.1.4.1.385.1.4.1.4.1		not-accessible
STR callDataCompEstTime	1.3.6.1.4.1.385.1.4.1.4.1.3	DisplayString	read-only	The time that this call connected to the remote system.
INT callDataCompIndex	1.3.6.1.4.1.385.1.4.1.4.1.1	INTEGER	read-only	The index of this call event in the callDataTable.
STR callDataCompPhoneNum	1.3.6.1.4.1.385.1.4.1.4.1.7	DisplayString	read-only	The Phone Number used when the call was placed.
STR callDataCompRelTime	1.3.6.1.4.1.385.1.4.1.4.1.4	DisplayString	read-only	The time that an established call released, or a requested call was marked as failing.
STR callDataCompReqTime	1.3.6.1.4.1.385.1.4.1.4.1.2	DisplayString	read-only	The time that this call was initiated.
STR callDataCompSourceSys	1.3.6.1.4.1.385.1.4.1.4.1.5	DisplayString	read-only	The System Name of the unit making the call.
INT callDataCompStatus	1.3.6.1.4.1.385.1.4.1.4.1.9	INTEGER	read-only	The current status of the call. (call active, call failed, etc.)
callDataCompTable	1.3.6.1.4.1.385.1.4.1.4		not-accessible	A list of completed call entries.
INT callDataTotalActiveCalls	1.3.6.1.4.1.385.1.4.1.2	INTEGER	read-only	The total number of currently active calls.
IP callDataTrapAddr	1.3.6.1.4.1.385.1.4.1.1	IpAddress	read-only	The IP address of the device to which Call Data traps will be sent. Set to 0.0.0.0 to disable Call Data traps.
NTF coldStart	1.3.6.1.2.1.11.0.0			A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered.
NTF compCallData	1.3.6.1.4.1.385.0.15			A compCallData trap signifies that the Completed Call records need to be retrieved from the unit.
d5PortStatsEntry	1.3.6.1.4.1.385.1.4.3.1.1		not-accessible
INT d5PortStatsInterval	1.3.6.1.4.1.385.1.4.3.2	INTEGER	read-write	The length of time over which the preceding stats are averaged.
d5PortStatsTable	1.3.6.1.4.1.385.1.4.3.1		not-accessible	A list of statistics collected for each Datamizer V port.
d5stats	1.3.6.1.4.1.385.1.4.3
INT d5StatsPortBPSIn	1.3.6.1.4.1.385.1.4.3.1.1.6	INTEGER	read-only	Received bits per second averaged over a configured interval.
INT d5StatsPortBPSOut	1.3.6.1.4.1.385.1.4.3.1.1.7	INTEGER	read-only	Transmitted bits per second averaged over a configured interval.
INT d5StatsPortIndex	1.3.6.1.4.1.385.1.4.3.1.1.1	INTEGER	read-only	The index of this port in the d5StatsTable.
CTR d5StatsPortPacketsIn	1.3.6.1.4.1.385.1.4.3.1.1.2	Counter	read-only	Raw count of incoming packets received on this port since power-up.
CTR d5StatsPortPacketsOut	1.3.6.1.4.1.385.1.4.3.1.1.3	Counter	read-only	Raw count of outgoing packets transmitted on this port since power-up.
INT d5StatsPortPPSIn	1.3.6.1.4.1.385.1.4.3.1.1.4	INTEGER	read-only	Received packets per second averaged over a configured interval.
INT d5StatsPortPPSOut	1.3.6.1.4.1.385.1.4.3.1.1.5	INTEGER	read-only	Transmitted packets per second averaged over a configured interval.
d5system	1.3.6.1.4.1.385.1.4.2
CTR d5SystemStatsCount	1.3.6.1.4.1.385.1.4.3.3.1.2	Counter	read-only	Raw count of events of this type detected since power-up.
d5SystemStatsEntry	1.3.6.1.4.1.385.1.4.3.3.1		not-accessible
INT d5SystemStatsIndex	1.3.6.1.4.1.385.1.4.3.3.1.1	INTEGER	read-only	The index of this type of event in the d5SystemStatsTable.
d5SystemStatsTable	1.3.6.1.4.1.385.1.4.3.3		not-accessible	A list of events collected for this Datamizer V unit.
NTF dailyConnLimit	1.3.6.1.4.1.385.0.5			A dailyConnLimit trap signifies that the cummulative connect time for originated calls to a remote site has been exceeded. No additional calls can be placed to this site until the next day; unless the administrator intervenes.
NTF dataErrorBChannel	1.3.6.1.4.1.385.0.7			A dataErrorBChannel trap signifies that the data received on a trunk has been received in error.
datamizerHseries	1.3.6.1.4.1.385.1.1
datamizerVseries	1.3.6.1.4.1.385.1.4
directroute4Series	1.3.6.1.4.1.385.1.3
directrouteSeries	1.3.6.1.4.1.385.1.2
drcalldata	1.3.6.1.4.1.385.1.4.1
INT drProdType	1.3.6.1.4.1.385.1.4.2.1	INTEGER	read-only	The type of product.
STR drSoftVersion	1.3.6.1.4.1.385.1.4.2.2	DisplayString	read-only	The Software version.
NTF duplicateItem	1.3.6.1.4.1.385.0.12			A duplicateItem trap signifies that some protocol entity (such as an IPX Network) has been discovered at two sites.
NTF egpNeighborLoss	1.3.6.1.2.1.11.0.5			An egpNeighborLoss trap signifies that an EGP neighbor for whom the sending protocol entity was an EGP peer has been marked down and the peer relationship no longer obtains.
NTF ipTableFull	1.3.6.1.4.1.385.0.9			An ipTableFull trap signifies that the IP Address Table is full and another entry cannot be made at this time.
NTF linkDown	1.3.6.1.2.1.11.0.2			A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
NTF linkUp	1.3.6.1.2.1.11.0.3			A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
NTF lostDedicated	1.3.6.1.4.1.385.0.14			A lostDedicated trap signifies that the dedicated trunk connection has been lost.
NTF macTableFull	1.3.6.1.4.1.385.0.10			A macTableFull trap signifies that the MAC Address Table is full and another entry cannot be made at this time.
NTF monthlyConnLimit	1.3.6.1.4.1.385.0.6			A monthlyConnLimit trap signifies that the cummulative connect time for originated calls to a remote site has been exceeded. No additional calls can be placed to this site until the next month; unless the administrator intervenes.
NTF noBChannel	1.3.6.1.4.1.385.0.4			A noBChannel trap signifies that the desired call to a remote site using a phone number was unsuccessful, this phone number has now been disabled.
NTF noDChannel	1.3.6.1.4.1.385.0.13			A noDChannel trap signifies that the D channel connection to the switch for a port cannot be made.
NTF pppVersion	1.3.6.1.4.1.385.0.8			A pppVersion trap signifies that the PPP/LCP versions used by this unit and its peer are incompatible.
products	1.3.6.1.4.1.385.1
NTF routeTableFull	1.3.6.1.4.1.385.0.11			A routeTableFull trap signifies that either the IP RIP, IPX RIP, or IPX SAP Table is full and another entry cannot be made at this time.
NTF startDisasterRecovery	1.3.6.1.4.1.385.0.2			A startDisasterRecovery trap signifies that the normal external path to a remote site has been lost, and an ISDN connection to that site will be made.
NTF stopDisasterRecovery	1.3.6.1.4.1.385.0.3			A stopDisasterRecovery trap signifies that the normal external path to a remote site has been recovered, any ISDN connections to that site will be terminated.
symplex	1.3.6.1.4.1.385
NTF unspecifiedTrap	1.3.6.1.4.1.385.0.1			An alarm condition has occured within the unit. This trap's text will provide details on the alarm.
NTF warmStart	1.3.6.1.2.1.11.0.1			A warmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent configuration nor the protocol entity implementation is altered.

RFC description

Symplex Communications Datamizer 5 and 6 series private MIB extension for data statistics and traps.

Start monitoring D5 platform devices (Datamizer H/V-series, DirectRoute series) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download D5-MIB

What Is D5-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description