C-PRODUCT-ETHER-SPECIFIC-MIB

All MIBs › C-PRODUCT-ETHER-SPECIFIC-MIB

Category: ATM Networking, Cabletron / Enterasys ATM & WAN

Description: Provides device-specific Ethernet management extensions for C-PRODUCT series hardware.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is C-PRODUCT-ETHER-SPECIFIC-MIB?

C-PRODUCT-ETHER-SPECIFIC-MIB is described as providing device-specific Ethernet management extensions for C-PRODUCT series network equipment, but no module description or sample objects were available in the source data. Based on its name, it likely supplements standard Ethernet interface objects with vendor-specific settings or counters not covered by IF-MIB/EtherLike-MIB. Whether it supports hardware or software status monitoring specifically cannot be confirmed without any object data being present. As an "Ethernet-specific" extension it would almost certainly depend on and supplement the standard IF-MIB and/or EtherLike-MIB for base Ethernet interface data. It would be deployed on C-PRODUCT series network access equipment with Ethernet interfaces. Engineers can download the C-PRODUCT-ETHER-SPECIFIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in C-PRODUCT-ETHER-SPECIFIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

C-PRODUCT series network access device

Monitoring Examples

No sample objects were provided for this module, so no concrete object names or monitoring scenario can be grounded in the source data; this appears to be a vendor extension to standard Ethernet interface MIBs, but its specific objects cannot be confirmed here.

Imported Objects

From C-PRODUCT-BASE-MIB

portNumber	OBJECT-TYPE
portSlot	OBJECT-TYPE

From C-PRODUCT-ETHER-MIB

ipOverAtm

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
IP ipAtmAtmRtrIpAddr	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.7	IpAddress	read-write	This is the ip address of the LIS router on ATM side.
IP ipAtmAtmRtrIpMask	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.8	IpAddress	read-write	This is the ip subnet mask of the LIS router on ATM side.
INT ipAtmBrCntl	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.2	INTEGER	read-write	The Bridging control status. When enabled, the virtual circuit specified here is also used to pass bridging frames.
ipAtmEntry	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1		not-accessible	Information about one IP over ATM configuration entry.
INT ipAtmIpCntl	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.1	INTEGER	read-write	The IP control status. When enabled, the virtual circuit specified here is used to pass IP traffic as routed frames. The IP control status.
IP ipAtmLanRtrIpAddr	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.4	IpAddress	read-write	This is the ip address of the router on ethernet port.
IP ipAtmLanRtrIpMask	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.5	IpAddress	read-write	This is the ip subnet mask of the router on ethernet port.
PHY ipAtmLanRtrMacAddr	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.6	PhysAddress	read-only	LAN Router's MAC-layer address.
CTR ipAtmStatAtmArpReq	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.9	Counter	read-only	The total number of ARP request packets received on the VC
CTR ipAtmStatAtmArpRes	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.10	Counter	read-only	The total number of ARP response packets received on the VC
CTR ipAtmStatAtmIpDrop	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.8	Counter	read-only	The total number of IP packets received from the VC and dropped
CTR ipAtmStatAtmIpFwd	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.7	Counter	read-only	The total number of IP packets received from the VC and forwarded
CTR ipAtmStatAtmIpRcv	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.6	Counter	read-only	The total number of IP packets received on the VC assigned at this port
ipAtmStatEntry	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1		not-accessible	Information about one IP over ATM statistics entry.
CTR ipAtmStatLanArpReq	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.4	Counter	read-only	The total number of ARP request packets received on the Port
CTR ipAtmStatLanArpRes	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.5	Counter	read-only	The total number of ARP response packets received on the Port
CTR ipAtmStatLanIpDrop	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.3	Counter	read-only	The total number of IP packets received from the Port and dropped
CTR ipAtmStatLanIpFwd	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.2	Counter	read-only	The total number of IP packets received from the Port and forwarded
CTR ipAtmStatLanIpRcv	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2.1.1	Counter	read-only	The total number of IP packets received on the Port
ipAtmStatTbl	1.3.6.1.4.1.43.1.12.3.1.1.17.3.2		not-accessible	The IP over ATM statistics table.
ipAtmTbl	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1		not-accessible	The IP over ATM configuration table.
INT ipAtmVcOtherSideId	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.11	INTEGER	read-write	This field is the global VC other side id of the IP/ATM VC, or 0 if no VC is assigned
INT ipAtmVcSideId	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.3	INTEGER	read-write	This field is the global VC side id of the LAN side of the IP/ATM VC, or 0 if no VC is assigned
IP portIpAddress	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.9	IpAddress	read-write	This is the ip address of ethernet port.
IP portIpSubnetMask	1.3.6.1.4.1.43.1.12.3.1.1.17.3.1.1.10	IpAddress	read-write	This is the subnet mask of ethernet port

RFC description

IP over ATM configuration and management for Ethernet bridge and router virtual circuit interfaces.

Start monitoring Networking equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download C-PRODUCT-ETHER-SPECIFIC-MIB

What Is C-PRODUCT-ETHER-SPECIFIC-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description