All MIBs › CXLapBD-MIB › lapbdStatusEvent
lapbdStatusEvent
Module: CXLapBD-MIB
OID (symbolic): CXLapBD-MIB::lapbdStatusEvent
OID (numeric): 1.3.6.1.4.1.495.2.1.6.27.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the status reported by a lapbdStatusIndication trap when it occurs. This object always returns the value 'noEvent' when read.
Options: noEvent (1): There is no status to report.
enteringCongestion (2): The data link connection is congested (lapbdMacSapTxQUpperThreshold has been exceeded). If this persists, the connection is terminated.
exitingCongestion (3): The data link connection has recovered from congestion and is operating normally.
linkUp (4): The LAPB/D link is active.
linkDown (5): The LAB/D link is inactive.
protocolError (6): A protocol error has occurred (FRMR for example).
invTeiRemovalAttempt (7): The local or remote attempted to remove a static TEI (terminal endpoint identifier).
What is lapbdStatusEvent?
Reports which link-state event most recently triggered a lapbdStatusIndication trap - values include enteringCongestion, linkUp, linkDown, protocolError, and invTeiRemovalAttempt - though reading this object directly always returns noEvent. It exists so a trap receiver can decode exactly what happened, e.g. invTeiRemovalAttempt(7) flags an attempt to remove a statically assigned ISDN terminal endpoint identifier.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.8 snmpwalk -v2c -c public <target> CXLapBD-MIB::lapbdStatusEvent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.8.1 snmpget -v2c -c public <target> CXLapBD-MIB::lapbdStatusEvent.1
Start monitoring Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXLapBD-MIB::lapbdStatusEvent OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.27 | cxLapBD | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.27.8 | lapbdStatusEvent | CXLapBD-MIB |