CXLapBD-MIB :: lapbdMacSapConnectionTimer

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › CXLapBD-MIB › lapbdMacSapConnectionTimer

lapbdMacSapConnectionTimer

Module: CXLapBD-MIB

OID (symbolic): CXLapBD-MIB::lapbdMacSapConnectionTimer

OID (numeric): 1.3.6.1.4.1.495.2.1.6.27.20.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines the maximum amount of time that the LAPB/D layer waits for a sub- layer to respond to a connection request. If this timer expires before a response is received, the connection is retried.

A positive response (connection confirmed) is only issued by the sub- layer when the physical/logical line is active, otherwise a negative response (disconnect indication) is issued.

Range of Values: 1 - 2047 (in tenths of a second)

Default Value: 30 (3 seconds)

Configuration Changed: administrative and operative

What is lapbdMacSapConnectionTimer?

Controls, in tenths of a second (1-2047, default 30 = 3 seconds), how long the LAPB/D layer waits for the physical sub-layer to confirm a connection request before retrying it. A modem or radio link with a slow line-up indication might need this raised above the 3-second default to avoid needless retries.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.20.1.13
snmpwalk -v2c -c public <target> CXLapBD-MIB::lapbdMacSapConnectionTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.20.1.13.1
snmpget -v2c -c public <target> CXLapBD-MIB::lapbdMacSapConnectionTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.27.20.1.13.1 i <value>

Start monitoring Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXLapBD-MIB::lapbdMacSapConnectionTimer OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.27cxLapBDCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.27.20lapbdMacSapTableCXLapBD-MIB
1.3.6.1.4.1.495.2.1.6.27.20.1lapbdMacSapEntryCXLapBD-MIB
1.3.6.1.4.1.495.2.1.6.27.20.1.13lapbdMacSapConnectionTimerCXLapBD-MIB