All MIBs › CXLapBD-MIB › lapbdDlcLocalFlowControlState
lapbdDlcLocalFlowControlState
Module: CXLapBD-MIB
OID (symbolic): CXLapBD-MIB::lapbdDlcLocalFlowControlState
OID (numeric): 1.3.6.1.4.1.495.2.1.6.27.23.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates the status of flow control on this MAC SAP (service access point). Same as lapbMacSapFlowControlState.
Flow control is initiated by this MAC SAP when overall system resources drop lower than the percentage specified by the global object lapbdLowerPoolThreshold, and is terminated when the overall system resources exceed the percentage specified by the global object lapbdUpperPoolThreshold.
Options: localflowNormal (1): Data flow is normal. No flow control procedures are active.
localflowStopped (2): Flow control procedures are active, since overall system resources have dropped lower than the percentage specified by global object lapbdLowerPoolThreshold.
noFlow (3): Indicates this SAP is configured incorrectly.
Related Objects: lapbdLowerPoolThreshold lapbdUpperPoolThreshold lapbMacSapFlowControlState
What is lapbdDlcLocalFlowControlState?
Reports whether this end of the data link connection is currently in flow control: localFlowNormal(1) is normal operation, localFlowStopped(2) means overall device buffer resources have dropped below lapbdLowerPoolThreshold and this connection is being throttled as a result.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.23.1.8 snmpwalk -v2c -c public <target> CXLapBD-MIB::lapbdDlcLocalFlowControlState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.27.23.1.8.1 snmpget -v2c -c public <target> CXLapBD-MIB::lapbdDlcLocalFlowControlState.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lapbdDlcLocalFlowControlState.1
Start monitoring Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXLapBD-MIB::lapbdDlcLocalFlowControlState OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN access router/multiplexer (LAPB link layer) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.27 | cxLapBD | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.27.23 | lapbdDlcStatusTable | CXLapBD-MIB |
| 1.3.6.1.4.1.495.2.1.6.27.23.1 | lapbdDlcStatusEntry | CXLapBD-MIB |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.8 | lapbdDlcLocalFlowControlState | CXLapBD-MIB |