All MIBs › CXFrameRelay-MIB › frpSapMonitoredEvents
frpSapMonitoredEvents
Module: CXFrameRelay-MIB
OID (symbolic): CXFrameRelay-MIB::frpSapMonitoredEvents
OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.1.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines the number of polling intervals that will be monitored at any one time for unanswered messages, unreceived messages, or messages received in error. This period must pass without frpSapErrorThreshold being exceeded before an interface can be brought up after being brought down because unanswered messages, unreceived messages, or messages received in error exceeded frpSapErrorThreshold. The value of frpSapMonitoredEvents must be greater than the value of frpSapErrorThreshold. This object is meaningful only if object frpSapType for this SAP is set to 'lower'.
Range of Values: 1 - 10
Default Value: 4
Configuration Changed: administrative
What is frpSapMonitoredEvents?
Sets, from 1 to 10, the number of consecutive polling intervals over which unanswered, unreceived, or errored Status Enquiry messages are tracked before an interface already brought down can come back up -- the N393 counter from ANSI T1.617 -- defaulting to 4. It must exceed frpSapErrorThreshold and applies only when frpSapType is 'lower'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.1.1.17 snmpwalk -v2c -c public <target> CXFrameRelay-MIB::frpSapMonitoredEvents
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.1.1.17.1 snmpget -v2c -c public <target> CXFrameRelay-MIB::frpSapMonitoredEvents.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.1.1.17.1 i <value>
Start monitoring CX Memotec Frame Relay access device/multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelay-MIB::frpSapMonitoredEvents OID value, configure state conditions and alerts, and monitor any CX Memotec Frame Relay access device/multiplexer from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.3 | cxFrameRelay | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.3.1 | frpSapTable | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.1.1 | frpSapEntry | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.1.1.17 | frpSapMonitoredEvents | CXFrameRelay-MIB |