All MIBs › CXFrameRelay-MIB › frpCircuitMultiProtEncaps
frpCircuitMultiProtEncaps
Module: CXFrameRelay-MIB
OID (symbolic): CXFrameRelay-MIB::frpCircuitMultiProtEncaps
OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether traffic on this virtual circuit receives a multiprotocol encapsulation header when outbound, and is stripped of this header when inbound, as specified in Frame Relay Forum's FRF.3 (Final) ('Multiprotocol Encapsulation Implementation Agreement') and the Network Working Group's RFC 1490 ('Multiprotocol Interconnect over Frame Relay').
Note: If this traffic does not pass through the Frame Relay module's FRIM software, it will move across this circuit transparently (i.e. without gaining or losing an encapsulation header).
Options: disabled (1): multiprotocol encapsulation is disabled
enabled (2): multiprotocol encapsulation is enabled
Default Value: disabled (1)
Configuration Changed: administrative
What is frpCircuitMultiProtEncaps?
Enables or disables FRF.3/RFC 1490 multiprotocol encapsulation on this circuit's traffic: when enabled(2), an encapsulation header is added on outbound frames and stripped on inbound frames as they pass through the FRIM software; traffic bypassing FRIM moves through unchanged regardless of this setting. It defaults to disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.9 snmpwalk -v2c -c public <target> CXFrameRelay-MIB::frpCircuitMultiProtEncaps
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.9.1 snmpget -v2c -c public <target> CXFrameRelay-MIB::frpCircuitMultiProtEncaps.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.9.1 i <value>
Start monitoring CX Memotec Frame Relay access device/multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelay-MIB::frpCircuitMultiProtEncaps OID value, configure state conditions and alerts, and monitor any CX Memotec Frame Relay access device/multiplexer from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.3 | cxFrameRelay | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.3.2 | frpCircuitTable | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1 | frpCircuitEntry | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1.9 | frpCircuitMultiProtEncaps | CXFrameRelay-MIB |