CXFrameRelay-MIB :: frpCircuitLowPriorityBurst

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXFrameRelay-MIB › frpCircuitLowPriorityBurst

frpCircuitLowPriorityBurst

Module: CXFrameRelay-MIB

OID (symbolic): CXFrameRelay-MIB::frpCircuitLowPriorityBurst

OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.2.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Determines the maximum number of inbound data bits having very high, high, or medium priority that the Frame Relay module commits to transfer within an established measurement interval.

NOTE: The higher this value, the greater the chance that low priority traffic will be discarded. This value cannot be greater than the value set in frpCircuitCommittedBurst.

Range of Values: 0 - 512,000

Default Value: 0

Configuration Changed: operative

What is frpCircuitLowPriorityBurst?

Sets, in bits from 0 to 512,000, the maximum committed inbound traffic across the very-high, high, and medium priority classes that this circuit commits to transfer, defaulting to 0; it can never exceed frpCircuitCommittedBurst, and raising it increases the risk of low-priority traffic being discarded.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.11
snmpwalk -v2c -c public <target> CXFrameRelay-MIB::frpCircuitLowPriorityBurst

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.11.1
snmpget -v2c -c public <target> CXFrameRelay-MIB::frpCircuitLowPriorityBurst.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.11.1 i <value>

Start monitoring CX Memotec Frame Relay access device/multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelay-MIB::frpCircuitLowPriorityBurst OID value, configure state conditions and alerts, and monitor any CX Memotec Frame Relay access device/multiplexer from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.3cxFrameRelayCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.3.2frpCircuitTableCXFrameRelay-MIB
1.3.6.1.4.1.495.2.1.6.3.2.1frpCircuitEntryCXFrameRelay-MIB
1.3.6.1.4.1.495.2.1.6.3.2.1.11frpCircuitLowPriorityBurstCXFrameRelay-MIB