All MIBs › CXFrameRelay-MIB › frpCircuitFragmentationSize
frpCircuitFragmentationSize
Module: CXFrameRelay-MIB
OID (symbolic): CXFrameRelay-MIB::frpCircuitFragmentationSize
OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.2.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether fragmentation is enabled (>0), and if so, the maximum size permitted per fragment. Fragmentation occurs when the frame size (including DLCI header) exceeds the value specified for this parameter. The frame is then fragmentation into smaller fragments, each with a maximum size specified by this parameter.
Note: This object only applies to circuits which are configured for Multi-Protocol Encapsulation (MPE) support (frpCircuitMultiProtEncaps = 'enabled'), and which are associated with a sap of type 'lower' (frpSapType = 'lower').
Range of Values: 0, 64 - 1024
Default Value: 0
Configuration Changed: operative
What is frpCircuitFragmentationSize?
Enables fragmentation and sets its maximum fragment size (0 disables it, otherwise 64 to 1024 bytes); frames whose total size including the DLCI header exceeds this value are split into fragments no larger than it. It only applies to circuits with frpCircuitMultiProtEncaps enabled on a SAP whose frpSapType is 'lower', and defaults to 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.18 snmpwalk -v2c -c public <target> CXFrameRelay-MIB::frpCircuitFragmentationSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.18.1 snmpget -v2c -c public <target> CXFrameRelay-MIB::frpCircuitFragmentationSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.18.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frpCircuitFragmentationSize.1
Start monitoring CX Memotec Frame Relay access device/multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelay-MIB::frpCircuitFragmentationSize OID value, configure state conditions and alerts, and monitor any CX Memotec Frame Relay access device/multiplexer from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.3 | cxFrameRelay | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.3.2 | frpCircuitTable | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1 | frpCircuitEntry | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1.18 | frpCircuitFragmentationSize | CXFrameRelay-MIB |