All MIBs › CXFrameRelay-MIB › frpCircuitCIRManagement
frpCircuitCIRManagement
Module: CXFrameRelay-MIB
OID (symbolic): CXFrameRelay-MIB::frpCircuitCIRManagement
OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether CIR management is enabled for this virtual circuit.
Note: If CIR management is enabled, frpCircuitCommittedBurst, frpCircuitExcessBurst and frpCircuitCommittedInformationRate are used to control the information flow rate at inbound/outbound of the virtual circuit. If CIR management is enabled only for monitoring, these objects are used to gather statistics regarding information flow rate.
Options: disabled (1): congestion management is disabled
enabled-inbound (2): CIR management is enabled at inbound
monitor-inbound (3): CIR management is enabled at inbound for monitoring only
enabled-outbound (4): CIR management is enabled at outbound
Default Value: disabled (1)
Configuration Changed: operative
What is frpCircuitCIRManagement?
Controls how the committed-information-rate objects (frpCircuitCommittedBurst, frpCircuitExcessBurst, frpCircuitCommittedInformationRate) are applied to this circuit: disabled(1) turns CIR control off, enabled-inbound(2) and enabled-outbound(4) actively enforce the rate in that direction, and monitor-inbound(3) only gathers statistics without enforcing it. It defaults to disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.8 snmpwalk -v2c -c public <target> CXFrameRelay-MIB::frpCircuitCIRManagement
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.8.1 snmpget -v2c -c public <target> CXFrameRelay-MIB::frpCircuitCIRManagement.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.2.1.8.1 i <value>
Start monitoring CX Memotec Frame Relay access device/multiplexer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelay-MIB::frpCircuitCIRManagement OID value, configure state conditions and alerts, and monitor any CX Memotec Frame Relay access device/multiplexer from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.3 | cxFrameRelay | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.3.2 | frpCircuitTable | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1 | frpCircuitEntry | CXFrameRelay-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.2.1.8 | frpCircuitCIRManagement | CXFrameRelay-MIB |