All MIBs › CXEthIo-MIB › ethSapAdmLoopbackType
ethSapAdmLoopbackType
Module: CXEthIo-MIB
OID (symbolic): CXEthIo-MIB::ethSapAdmLoopbackType
OID (numeric): 1.3.6.1.4.1.495.2.1.6.45.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether the port performs remote loopback, local loopback or both.
Options: none (1): Loopback is disabled.
local (2): The Service Access Point associated with the port returns all frames to the originating layer without transmitting them.
remote (3): The port transmists back whatever it receives. (This implies that the Service Access Point associated with the port will not permit communications with any upper layer requesting service.)
both (4): Both remote and local loopback enabled.
Default Value: none (1)
Configuration Changed: administrative.
What is ethSapAdmLoopbackType?
Configures the loopback mode to apply to this port: none (default), local, remote, or both -- used to plan a test loop before it's activated operationally.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.45.2.1.7 snmpwalk -v2c -c public <target> CXEthIo-MIB::ethSapAdmLoopbackType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.45.2.1.7.1 snmpget -v2c -c public <target> CXEthIo-MIB::ethSapAdmLoopbackType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.45.2.1.7.1 i <value>
Start monitoring Aastra ConvertedX (CX) WAN access device (Ethernet I/O module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXEthIo-MIB::ethSapAdmLoopbackType OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN access device (Ethernet I/O module) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.45 | cxEthIo | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.45.2 | ethSapAdmTable | CXEthIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.45.2.1 | ethSapAdmEntry | CXEthIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.45.2.1.7 | ethSapAdmLoopbackType | CXEthIo-MIB |