All MIBs › CXAsyncIo-MIB › asioSapAdmPortCarrierAction
asioSapAdmPortCarrierAction
Module: CXAsyncIo-MIB
OID (symbolic): CXAsyncIo-MIB::asioSapAdmPortCarrierAction
OID (numeric): 1.3.6.1.4.1.495.2.1.6.44.2.1.27
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether or not this SAP (service access point) will inform the associated upper layer SAP that service is no longer available because its associated hardware port has detected a loss of DCD (Data Carrier Detect) if the port is physically strapped as a DTE, or a loss of DTR (Data Terminal Ready) if the port is physically strapped as a DCE.
Options: disabled (1)
enabled (2)
Default Value: enabled
Configuration Changed: Administrative
What is asioSapAdmPortCarrierAction?
Configures whether this SAP should notify the upper layer that service is unavailable when the port loses DCD (as DTE) or DTR (as DCE) - enabled by default in this administrative table, so a dropped carrier is reported upward unless explicitly disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.44.2.1.27 snmpwalk -v2c -c public <target> CXAsyncIo-MIB::asioSapAdmPortCarrierAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.44.2.1.27.1 snmpget -v2c -c public <target> CXAsyncIo-MIB::asioSapAdmPortCarrierAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.44.2.1.27.1 i <value>
Start monitoring CX (Memotec) WAN gateway (async serial I/O ports) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsyncIo-MIB::asioSapAdmPortCarrierAction OID value, configure state conditions and alerts, and monitor any CX (Memotec) WAN gateway (async serial I/O ports) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.44 | cxAsyncIo | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.44.2 | asioSapAdmTable | CXAsyncIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.44.2.1 | asioSapAdmEntry | CXAsyncIo-MIB |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.27 | asioSapAdmPortCarrierAction | CXAsyncIo-MIB |