CXAsync-MIB :: asySapYTTimer

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXAsync-MIB › asySapYTTimer

asySapYTTimer

Module: CXAsync-MIB

OID (symbolic): CXAsync-MIB::asySapYTTimer

OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.20.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Defines the time of inactivity, in seconds, after which the SAP (service access point) will send a disconnect request to the MAC layer. The timer starts when the line is enabled or the virtual circuit is cleared and stops when the first character of a command is entered.

Range of Values: 0 to 255

Note: A value of 0 means that the timer is disabled.

Default Value: 60

Configuration Changed: Operative

What is asySapYTTimer?

This read-write value (0-255 seconds, default 60; 0 = disabled) sets how long the SAP waits idle before sending a disconnect request to the MAC layer -- effectively an inactivity/idle-timeout an admin sets to reclaim unused dial-in sessions, per CCITT X.28 Annex B.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.16
snmpwalk -v2c -c public <target> CXAsync-MIB::asySapYTTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.16.1
snmpget -v2c -c public <target> CXAsync-MIB::asySapYTTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.16.1 i <value>

Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapYTTimer OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.30cxAsyncCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.30.20asySapTableCXAsync-MIB
1.3.6.1.4.1.495.2.1.6.30.20.1asySapEntryCXAsync-MIB
1.3.6.1.4.1.495.2.1.6.30.20.1.16asySapYTTimerCXAsync-MIB