All MIBs › CXAsync-MIB › asySapProtocolId
asySapProtocolId
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asySapProtocolId
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.20.1.27
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Defines the protocol format that is used for incoming call or call request packets to the X.25 call data field.
The field consists of 4 hexadecimal octets where the first octet is coded as follows:
bits 8 & 7
- 00 for CCITT use - 01 for national use - 10 reserved for international user bodies - 11 for DTE-DTE use
When bits 8 & 7 are equal to 00, bits 6 to 1 will be equal to 000001. The first octet is shown as 01, 00, 00, 00. The first 0 in each number is optional and may be shown as 1, 0, 0, 0.
All bits of octets 2, 3 and 4 are set to 0. They are reserved as a future mechanism for providing the called PAD or packet mode DTE (user) with additional information pertaining to the calling party.
Default Value: 01,00,00,00
Configuration Changed: Operative
What is asySapProtocolId?
This read-write 4-octet hex string (default 01,00,00,00) sets the protocol identifier placed in the call/call-request user data field per CCITT X.28/X.29, used by the remote end to recognize which higher-layer protocol is riding over the X.25 call.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.27 snmpwalk -v2c -c public <target> CXAsync-MIB::asySapProtocolId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.27.1 snmpget -v2c -c public <target> CXAsync-MIB::asySapProtocolId.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.20.1.27.1 s <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapProtocolId OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.20 | asySapTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.20.1 | asySapEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.20.1.27 | asySapProtocolId | CXAsync-MIB |