All MIBs › CXAsync-MIB › asySapProfParameter3
asySapProfParameter3
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asySapProfParameter3
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.22.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the X.3 parameter 3, Selection of data forwarding character(s). This parameter allows the selection of defined sets of characters received from the start-stop mode DTE (user) to be recognized by the PAD as an indication to complete the assembly and forward a complete packet
Range of Values: 0: No data forwarding character(s) 1: Alphanumeric characters (A-Z, a-z and 0-9) 2: Character CR 4: Characters ESC, BEL, ENQ and ACK 6: Characters CR, ESC, BEL, ENQ and ACK 8: Characters DEL, CAN and DC2 16: Characters ETX and EOT 18: Characters CR, ETX and EOT 32: Characters HT, LF, VT and FF 64: All characters in columns 0 and 1 of IA5 except those shown for values 2, 4, 8 and 32 126: All characters in columns 0 and 1 and character DEL
Note: Some values are combinations of other values (i.e., value 18 is a combination of values 2 and 16).
Default Value: 0
Configuration Changed: Operative
What is asySapProfParameter3?
X.3 parameter 3 (data forwarding character selection) here is the operational value currently in effect at this specific SAP (as opposed to the stored profile template) -- it (default 0=none; other values select sets like CR, ESC/BEL/ENQ/ACK, or all of IA5 columns 0-1) picks which typed characters trigger the PAD to assemble and forward a packet immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.7 snmpwalk -v2c -c public <target> CXAsync-MIB::asySapProfParameter3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.7.1 snmpget -v2c -c public <target> CXAsync-MIB::asySapProfParameter3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.7.1 i <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapProfParameter3 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.22 | asySapProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1 | asySapProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1.7 | asySapProfParameter3 | CXAsync-MIB |