All MIBs › CXAsync-MIB › asySapProfParameter20
asySapProfParameter20
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asySapProfParameter20
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.22.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the X.3 parameter 20, Echo mask. This parameter allows selected defined sets of characters received from the start-stop mode DTE (user) not to be transmitted back to the DTE.
Range of Values: 0: No echo mask (all characters echoed) 1: No echo of CR 2: No echo of LF 4: No echo of VT, HT and FF 8: No echo of BEL and BS 16: No echo of ESC and ENQ 32: No echo of ACK, NAK, STX, SOH, EOT, ETB and ETX 64: No echo of editing characters as designated by parameters 16, 17 and 18 128: No echo of all other characters in columns 0 and 1 not mentioned above and DEL
Default Value: 0
Configuration Changed: Operative
What is asySapProfParameter20?
X.3 parameter 20 (echo mask) here is the operational value currently in effect at this specific SAP (as opposed to the stored profile template) -- it (0=echo everything, up to 128=suppress DEL/other control chars, values combine as a bitmask, default 0) selectively suppresses which characters get echoed back to the terminal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.24 snmpwalk -v2c -c public <target> CXAsync-MIB::asySapProfParameter20
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.24.1 snmpget -v2c -c public <target> CXAsync-MIB::asySapProfParameter20.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.24.1 i <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapProfParameter20 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.22 | asySapProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1 | asySapProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1.24 | asySapProfParameter20 | CXAsync-MIB |