All MIBs › CXAsync-MIB › asySapProfParameter13
asySapProfParameter13
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asySapProfParameter13
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.22.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the X.3 parameter 13, Linefeed insertion after carriage return. This parameter allows for the automatic insertion of a linefeed character in the character stream to and from the start-stop DTE (user) or after each carriage return. This parameter applies only in the data transfer state.
Range of Values: 0: No linefeed insertion 1: Insert linefeed after transmission of CR to the start-stop mode DTE 2: Insert linefeed after each CR in the data stream from the start-stop mode DTE 4: Insert linefeed after echo of CR to start-stop mode DTE 5: Insert linefeed after transmission to the start-stop mode DTE and after echo of CR 6: Insert linefeed in data stream after CR from start-stop mode DTE and after an echo of a CR to the start-stop mode DTE 7: Insert linefeed in the data stream to and from the start-stop mode DTE and after an echo of a CR to the start-stop mode DTE
Default Value: 0
Configuration Changed: Operative
What is asySapProfParameter13?
X.3 parameter 13 (linefeed insertion after carriage return) here is the operational value currently in effect at this specific SAP (as opposed to the stored profile template) -- it (0-7, default 0=none; other values insert LF on transmit, receive, echo, or combinations) auto-inserts a linefeed wherever a bare CR would otherwise confuse a terminal/printer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.17 snmpwalk -v2c -c public <target> CXAsync-MIB::asySapProfParameter13
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.17.1 snmpget -v2c -c public <target> CXAsync-MIB::asySapProfParameter13.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.17.1 i <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapProfParameter13 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.22 | asySapProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1 | asySapProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1.17 | asySapProfParameter13 | CXAsync-MIB |