All MIBs › CXAsync-MIB › asySapProfParameter11
asySapProfParameter11
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asySapProfParameter11
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.22.1.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Defines the X.3 parameter 11, Binary speed of start-stop mode DTE.
Options: 0: 110 bit/s 1: 134.5 bit/s 2: 300 bit/s 3: 1200 bit/s 4: 600 bit/s 5: 75 bit/s 6: 150 bit/s 7: 1800 bit/s 8: 200 bit/s 9: 100 bit/s 10: 50 bit/s 11: 75/1200 bit/s (not supported) 12: 2400 bit/s 13: 4800 bit/s 14: 9600 bit/s 15: 19200 bit/s 16: 48000 bit/s 17: 56000 bit/s 18: 64000 bit/s 19: 14400 bit/s 20: 38400 bit/s 21: 57600 bit/s 22: 115200 bit/s 255: non standard bit rate
Default Value: 110 bit/s
What is asySapProfParameter11?
X.3 parameter 11 (binary speed of the start-stop DTE) here is the operational value currently in effect at this specific SAP (as opposed to the stored profile template) -- it (a fixed enumeration such as 14=9600 bit/s, up to 22=115200 bit/s or 255=non-standard; default 110 bit/s) reports the negotiated serial line speed of the attached terminal. Unlike the profile-table copy, this one is read-only because it reflects the terminal's negotiated line speed rather than a configurable setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.15 snmpwalk -v2c -c public <target> CXAsync-MIB::asySapProfParameter11
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.22.1.15.1 snmpget -v2c -c public <target> CXAsync-MIB::asySapProfParameter11.1
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asySapProfParameter11 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.22 | asySapProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1 | asySapProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.22.1.15 | asySapProfParameter11 | CXAsync-MIB |