All MIBs › CXAsync-MIB › asyProfParameter7
asyProfParameter7
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asyProfParameter7
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.21.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the X.3 parameter 7, Selection of operation of the PAD on receipt of a break signal from the start-stop mode DTE. This parameter allows the selection of the operation of the PAD after the receipt of a break signal from the start-stop mode DTE (user).
Range of Values: 0: Nothing 1: Interrupt 2: Reset 4: Send to DTE an indication of break PAD message 5: Interrupt and indication of break 8: Escape from data transfer state 16: Discard output, to start-stop mode DTE 21: Discard output, interrupt and indication of break
Default Value: 0
Configuration Changed: Operative
What is asyProfParameter7?
X.3 parameter 7 (behavior on receipt of a break signal) in this stored X.3 profile (0=nothing, 1=interrupt, 2=reset, 4=send break indication, 5/8/16/21=combinations, default 0) selects what the PAD does when the terminal sends a serial break; an admin edits it here to change how any SAP loading this profile (via asySapX3Profile) behaves for PAD sessions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.11 snmpwalk -v2c -c public <target> CXAsync-MIB::asyProfParameter7
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.11.1 snmpget -v2c -c public <target> CXAsync-MIB::asyProfParameter7.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.11.1 i <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asyProfParameter7 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.21 | asyProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.21.1 | asyProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.21.1.11 | asyProfParameter7 | CXAsync-MIB |