All MIBs › CXAsync-MIB › asyProfParameter13
asyProfParameter13
Module: CXAsync-MIB
OID (symbolic): CXAsync-MIB::asyProfParameter13
OID (numeric): 1.3.6.1.4.1.495.2.1.6.30.21.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the X.3 parameter 13, Linefeed insertion after carriage return. This parameter allows for the automatic insertion of a linefeed character in the character stream to and from the start-stop DTE (user) or after each carriage return. This parameter applies only in the data transfer state.
Range of Values: 0: No linefeed insertion 1: Insert linefeed after transmission of CR to the start-stop mode DTE 2: Insert linefeed after each CR in the data stream from the start-stop mode DTE 4: Insert linefeed after echo of CR to start-stop mode DTE 5: Insert linefeed after transmission to the start-stop mode DTE and after echo of CR 6:Insert linefeed in data stream after CR from start-stop mode DTE and after an echo of a CR to the start-stop mode DTE 7: Insert linefeed in the data stream to and from the start-stop mode DTE and after an echo of a CR to the start-stop mode DTE
Default Value: 0
Configuration Changed: Operative
What is asyProfParameter13?
X.3 parameter 13 (linefeed insertion after carriage return) in this stored X.3 profile (0-7, default 0=none; other values insert LF on transmit, receive, echo, or combinations) auto-inserts a linefeed wherever a bare CR would otherwise confuse a terminal/printer; an admin edits it here to change how any SAP loading this profile (via asySapX3Profile) behaves for PAD sessions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.17 snmpwalk -v2c -c public <target> CXAsync-MIB::asyProfParameter13
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.17.1 snmpget -v2c -c public <target> CXAsync-MIB::asyProfParameter13.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.30.21.1.17.1 i <value>
Start monitoring Memotec CX-series statistical multiplexer/X.25 PAD device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXAsync-MIB::asyProfParameter13 OID value, configure state conditions and alerts, and monitor any Memotec CX-series statistical multiplexer/X.25 PAD device from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.30 | cxAsync | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.30.21 | asyProfTable | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.21.1 | asyProfEntry | CXAsync-MIB |
| 1.3.6.1.4.1.495.2.1.6.30.21.1.17 | asyProfParameter13 | CXAsync-MIB |