All MIBs › CPQSTSYS-MIB › cpqSsChassisScsiIoModuleType
cpqSsChassisScsiIoModuleType
Module: CPQSTSYS-MIB
OID (symbolic): CPQSTSYS-MIB::cpqSsChassisScsiIoModuleType
OID (numeric): 1.3.6.1.4.1.232.8.2.2.1.1.24
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Storage System Chassis SCSI I/O Module Type.
The following values are defined:
other(1) The agent does not recognize SCSI I/O module type. You may need to upgrade your software.
io2port(2) A 2-Port Ultra3 SCSI I/O Module is installed.
io4portUpgradeFirmware(3) A 4-Port Shared Storage Module for Smart Array Cluster Storage is installed, but the current controller firmware does not support it. Upgrade your controller firmware.
io4port(4) A 4-Port Shared Storage Module for Smart Array Cluster Storage is installed.
io2port320(5) A 2-Port Ultra320 SCSI I/O Module is installed.
io4port320(6) A 4-Port Ultra320 SCSI I/O Module is installed.
io1port320(7) A 1-Port Ultra320 SCSI I/O Module is installed.
What is cpqSsChassisScsiIoModuleType?
This read-only enumerated value identifies which type of SCSI I/O module is installed in the chassis, such as a 2-port or 4-port Ultra3/Ultra320 module. Administrators use this to know the chassis's I/O expansion capability and whether a firmware upgrade is needed to fully use an installed module. For example, io4portUpgradeFirmware(3) tells the admin a 4-port module is physically installed but the controller firmware needs updating before it can be used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.8.2.2.1.1.24 snmpwalk -v2c -c public <target> CPQSTSYS-MIB::cpqSsChassisScsiIoModuleType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.8.2.2.1.1.24.1 snmpget -v2c -c public <target> CPQSTSYS-MIB::cpqSsChassisScsiIoModuleType.1
Start monitoring HP/Compaq StorageWorks storage array (RAID/logical volume/disk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSTSYS-MIB::cpqSsChassisScsiIoModuleType OID value, configure state conditions and alerts, and monitor any HP/Compaq StorageWorks storage array (RAID/logical volume/disk) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.8 | cpqSsStorageSys | CPQSTSYS-MIB |
| 1.3.6.1.4.1.232.8.2 | cpqSsDrvBox | CPQSTSYS-MIB |
| 1.3.6.1.4.1.232.8.2.2 | cpqSsBoxExtended | CPQSTSYS-MIB |
| 1.3.6.1.4.1.232.8.2.2.1 | cpqSsChassisTable | CPQSTSYS-MIB |
| 1.3.6.1.4.1.232.8.2.2.1.1 | cpqSsChassisEntry | CPQSTSYS-MIB |
| 1.3.6.1.4.1.232.8.2.2.1.1.24 | cpqSsChassisScsiIoModuleType | CPQSTSYS-MIB |