CPQSTSYS-MIB :: cpqSsChassisFcaLogicalDriveCondition

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQSTSYS-MIBcpqSsChassisFcaLogicalDriveCondition

cpqSsChassisFcaLogicalDriveCondition

Module: CPQSTSYS-MIB

OID (symbolic): CPQSTSYS-MIB::cpqSsChassisFcaLogicalDriveCondition

OID (numeric): 1.3.6.1.4.1.232.8.2.2.1.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Storage System Fibre Channel Array Logical Drive Condition.

This is the aggregate condition of all Fibre Channel Array Logical Drives in this storage system chassis. The following values are defined:

other(1) The condition cannot be determined or is not supported on this storage system.

ok(2) All Fibre Channel Array Controllers Logical Drives are operating normally.

degraded(3) At least one Fibre Channel Array Controller Logical Drive is degraded.

failed(4) At least one Fibre Channel Array Controller Logical Drive is failed.

What is cpqSsChassisFcaLogicalDriveCondition?

This read-only enumerated value reports the aggregate condition of all Fibre Channel Array logical drives in the chassis. Admins monitor this to catch a degraded RAID logical volume that could risk data availability. For example, degraded(3) would prompt the admin to check the underlying physical drives for a failed member disk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.8.2.2.1.1.16
snmpwalk -v2c -c public <target> CPQSTSYS-MIB::cpqSsChassisFcaLogicalDriveCondition

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.8.2.2.1.1.16.1
snmpget -v2c -c public <target> CPQSTSYS-MIB::cpqSsChassisFcaLogicalDriveCondition.1

Start monitoring HP/Compaq StorageWorks storage array (RAID/logical volume/disk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSTSYS-MIB::cpqSsChassisFcaLogicalDriveCondition OID value, configure state conditions and alerts, and monitor any HP/Compaq StorageWorks storage array (RAID/logical volume/disk) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.8cpqSsStorageSysCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2cpqSsDrvBoxCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.2cpqSsBoxExtendedCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.2.1cpqSsChassisTableCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.2.1.1cpqSsChassisEntryCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.2.1.1.16cpqSsChassisFcaLogicalDriveConditionCPQSTSYS-MIB