CPQSTSYS-MIB :: cpqSsBoxFanStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQSTSYS-MIBcpqSsBoxFanStatus

cpqSsBoxFanStatus

Module: CPQSTSYS-MIB

OID (symbolic): CPQSTSYS-MIB::cpqSsBoxFanStatus

OID (numeric): 1.3.6.1.4.1.232.8.2.1.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Drive Box Fan Status.

This is the current status of the fans in the drive box. This value will be one of the following: other(1) Fan monitoring is not supported by this system or it is not supported by the driver.

ok(2) All fans are working normally.

failed(3) One or more storage system fans have failed. The fan(s) should be replaced immediately to avoid hardware damage.

noFan(4) This unit does not support fan monitoring.

degraded(5) At least one storage system fan has failed, but there is still sufficient cooling capacity to allow the system to continue. The fan should be replaced.

What is cpqSsBoxFanStatus?

This read-only enumerated value reports the current status of the cooling fans inside a drive box. An admin monitors it because a failed or degraded fan risks overheating and damaging the drives inside the enclosure. For example, seeing failed(3) here means one or more box fans have stopped and should be replaced immediately to avoid hardware damage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.8.2.1.1.7
snmpwalk -v2c -c public <target> CPQSTSYS-MIB::cpqSsBoxFanStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.8.2.1.1.7.1
snmpget -v2c -c public <target> CPQSTSYS-MIB::cpqSsBoxFanStatus.1

Start monitoring HP/Compaq StorageWorks storage array (RAID/logical volume/disk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSTSYS-MIB::cpqSsBoxFanStatus OID value, configure state conditions and alerts, and monitor any HP/Compaq StorageWorks storage array (RAID/logical volume/disk) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.8cpqSsStorageSysCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2cpqSsDrvBoxCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.1cpqSsDrvBoxTableCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.1.1cpqSsDrvBoxEntryCPQSTSYS-MIB
1.3.6.1.4.1.232.8.2.1.1.7cpqSsBoxFanStatusCPQSTSYS-MIB