CPQSCSI-MIB :: cpqTapeCountersTotalUncorrectable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQSCSI-MIBcpqTapeCountersTotalUncorrectable

cpqTapeCountersTotalUncorrectable

Module: CPQSCSI-MIB

OID (symbolic): CPQSCSI-MIB::cpqTapeCountersTotalUncorrectable

OID (numeric): 1.3.6.1.4.1.232.5.4.2.1.1.8

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: Tape Device Total Uncorrectable Errors.

This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape Hardware Interface driver was loaded.

Errors may occasionally occur. If this value should rise dramatically, you may need to clean the device. If you continue to have errors, you may have a problem. Some common causes include radio frequency interference (RFI) on the bus cables, bad or missing terminating resisters on the drives or having more than one device with the same SCSI ID. Insure the bus cable is free of obstructions and that the devices on the bus are properly configured.

What is cpqTapeCountersTotalUncorrectable?

This counter tracks the total number of read and write errors on the tape device that could not be corrected at all, maintained since the Tape Hardware Interface driver was loaded. Because these are uncorrectable, a rising count is a stronger signal of real data-integrity risk than the correctable-error counters. For example, a nonzero and growing totalUncorrectable count would prompt the admin to verify the last several backup tapes were actually readable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.5.4.2.1.1.8
snmpwalk -v2c -c public <target> CPQSCSI-MIB::cpqTapeCountersTotalUncorrectable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.5.4.2.1.1.8.1
snmpget -v2c -c public <target> CPQSCSI-MIB::cpqTapeCountersTotalUncorrectable.1

Start monitoring Compaq (HP) server (SCSI storage controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSCSI-MIB::cpqTapeCountersTotalUncorrectable OID value, configure state conditions and alerts, and monitor any Compaq (HP) server (SCSI storage controller) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.5cpqScsiCPQSCSI-MIB
1.3.6.1.4.1.232.5.4cpqTapeComponentCPQSCSI-MIB
1.3.6.1.4.1.232.5.4.2cpqTapeCountersCPQSCSI-MIB
1.3.6.1.4.1.232.5.4.2.1cpqTapeCountersTableCPQSCSI-MIB
1.3.6.1.4.1.232.5.4.2.1.1cpqTapeCountersEntryCPQSCSI-MIB
1.3.6.1.4.1.232.5.4.2.1.1.8cpqTapeCountersTotalUncorrectableCPQSCSI-MIB