All MIBs › CPQSCSI-MIB › cpqScsiPhyDrvFuncTest1
cpqScsiPhyDrvFuncTest1
Module: CPQSCSI-MIB
OID (symbolic): CPQSCSI-MIB::cpqScsiPhyDrvFuncTest1
OID (numeric): 1.3.6.1.4.1.232.5.2.4.1.1.27
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: SCSI Physical Drive Functional Test 1.
This is a percentage value that represents the operating efficiency of a drive. The functional test issues a series of SCSI commands and times the results. When the drive has the test run for the very first time (service time is zero), the results are saved as the baseline value. Then, whenever the test is executed the current result is compared to the baseline result and expressed as a percent.
If the percentage result should drop rapidly there may be a problem with the drive. You may wish to replace the drive as a precaution.
What is cpqScsiPhyDrvFuncTest1?
This gauge is a percentage representing a drive's operating efficiency from the first of its built-in functional tests, which times a series of SCSI commands against a baseline recorded on the drive's first test run. A result meaningfully below 100% signals the drive's performance has degraded from its original baseline. For example, if funcTest1 drops from a baseline near 100% to 70%, the admin would treat that drive as a performance-degradation candidate for replacement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.5.2.4.1.1.27 snmpwalk -v2c -c public <target> CPQSCSI-MIB::cpqScsiPhyDrvFuncTest1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.5.2.4.1.1.27.1 snmpget -v2c -c public <target> CPQSCSI-MIB::cpqScsiPhyDrvFuncTest1.1
Start monitoring Compaq (HP) server (SCSI storage controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSCSI-MIB::cpqScsiPhyDrvFuncTest1 OID value, configure state conditions and alerts, and monitor any Compaq (HP) server (SCSI storage controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.5 | cpqScsi | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2 | cpqScsiComponent | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.4 | cpqScsiPhyDrv | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.4.1 | cpqScsiPhyDrvTable | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.4.1.1 | cpqScsiPhyDrvEntry | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.4.1.1.27 | cpqScsiPhyDrvFuncTest1 | CPQSCSI-MIB |