All MIBs › CPQSCSI-MIB › cpqScsiLogDrvPercentRebuild
cpqScsiLogDrvPercentRebuild
Module: CPQSCSI-MIB
OID (symbolic): CPQSCSI-MIB::cpqScsiLogDrvPercentRebuild
OID (numeric): 1.3.6.1.4.1.232.5.2.3.1.1.11
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value is the percent complete of the rebuild. When the value reaches 100, the rebuilding process is complete. The drive array continues to operate in interim recovery mode while a drive is rebuilding.
This value is only valid if the Logical Drive Status is rebuilding(7).
If the value cannot be determined or a rebuild is not active, the value is set to 0.
What is cpqScsiLogDrvPercentRebuild?
This read-only Gauge reports what percentage of a logical drive's rebuild process is complete after a failed physical drive has been replaced, reaching 100 when the rebuild finishes, and per the description this value is only valid while the logical drive's status is rebuilding(7). Admins watch this value to estimate how much longer a drive array will keep running in interim recovery mode before it is fully redundant again. For example, an admin sees this gauge at 42 percent and knows the array is still running without full redundancy until the rebuild reaches 100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.5.2.3.1.1.11 snmpwalk -v2c -c public <target> CPQSCSI-MIB::cpqScsiLogDrvPercentRebuild
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.5.2.3.1.1.11.1 snmpget -v2c -c public <target> CPQSCSI-MIB::cpqScsiLogDrvPercentRebuild.1
Start monitoring Compaq (HP) server (SCSI storage controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQSCSI-MIB::cpqScsiLogDrvPercentRebuild OID value, configure state conditions and alerts, and monitor any Compaq (HP) server (SCSI storage controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.5 | cpqScsi | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2 | cpqScsiComponent | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.3 | cpqScsiLogDrv | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.3.1 | cpqScsiLogDrvTable | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.3.1.1 | cpqScsiLogDrvEntry | CPQSCSI-MIB |
| 1.3.6.1.4.1.232.5.2.3.1.1.11 | cpqScsiLogDrvPercentRebuild | CPQSCSI-MIB |