All MIBs › CPQIDE-MIB › cpqIdeIdentUltraAtaAvailability
cpqIdeIdentUltraAtaAvailability
Module: CPQIDE-MIB
OID (symbolic): CPQIDE-MIB::cpqIdeIdentUltraAtaAvailability
OID (numeric): 1.3.6.1.4.1.232.14.2.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This describes the availability of Ultra ATA transfers between this device and the controller.
The following values are defined:
other(1) The agents do not support reporting this variable or the agent need to be upgraded.
noNotSupportedByDeviceAndController(2), The device and the controller do not support Ultra ATA.
noNotSupportedByDevice(3), The device does not support Ultra ATA but the controller does support Ultra ATA.
noNotSupportedByController(4), The controller does not support Ultra ATA but the device does support Ultra ATA.
NoDisabledInSetup(5), The device and the controller do support Ultra ATA but it has been disabled in F10 Setup.
yesEnabledInSetup(6), The device and the controller do support Ultra ATA and it is enabled in F10 Setup.
What is cpqIdeIdentUltraAtaAvailability?
This enumerated value reports whether Ultra ATA high-speed transfer mode is available between a specific device and its controller, with several 'not supported' and 'disabled in setup' variants distinguishing why it isn't active. An admin checks this when troubleshooting slower-than-expected disk throughput to see if Ultra ATA simply isn't negotiated on that channel. For example, noDisabledInSetup(5) tells the admin Ultra ATA is disabled in BIOS/setup and could be re-enabled to improve performance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.14.2.2.1.1.11 snmpwalk -v2c -c public <target> CPQIDE-MIB::cpqIdeIdentUltraAtaAvailability
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.14.2.2.1.1.11.1 snmpget -v2c -c public <target> CPQIDE-MIB::cpqIdeIdentUltraAtaAvailability.1
Start monitoring HP/Compaq ProLiant server (IDE/ATA disk drives) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDE-MIB::cpqIdeIdentUltraAtaAvailability OID value, configure state conditions and alerts, and monitor any HP/Compaq ProLiant server (IDE/ATA disk drives) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.14 | cpqIde | CPQIDE-MIB |
| 1.3.6.1.4.1.232.14.2 | cpqIdeComponent | CPQIDE-MIB |
| 1.3.6.1.4.1.232.14.2.2 | cpqIdeIdent | CPQIDE-MIB |
| 1.3.6.1.4.1.232.14.2.2.1 | cpqIdeIdentTable | CPQIDE-MIB |
| 1.3.6.1.4.1.232.14.2.2.1.1 | cpqIdeIdentEntry | CPQIDE-MIB |
| 1.3.6.1.4.1.232.14.2.2.1.1.11 | cpqIdeIdentUltraAtaAvailability | CPQIDE-MIB |