All MIBs › CPQIDA-MIB › cpqDaSparePercentRebuild
cpqDaSparePercentRebuild
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaSparePercentRebuild
OID (numeric): 1.3.6.1.4.1.232.3.2.4.1.1.11
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Drive Array Spare Percent Rebuild.
If the spare status is building(5), then this is percent complete of of the rebuild.
The data contained on the failed physical drive must be reconstructed from the fault tolerance data and copied to the spare so that the spare can function in place of the failed drive.
When the number reaches one hundred (100), the building process is complete and the spare has replaced the physical drive.
If the value cannot be determined or a rebuild is not active, the value is set to 4,294,967,295.
What is cpqDaSparePercentRebuild?
This Gauge, valid when the spare status is building, shows the percent complete of reconstructing data from fault-tolerance information onto the spare drive, reaching 100 when the spare has fully replaced the failed drive. An admin watches this to estimate remaining time before the array returns to full fault tolerance after a drive failure. For example, cpqDaSparePercentRebuild reaching 100 tells the admin the spare has completely taken over for the failed drive and the array is once again fully redundant.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.4.1.1.11 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaSparePercentRebuild
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.4.1.1.11.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaSparePercentRebuild.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaSparePercentRebuild OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.4 | cpqDaSpareDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.4.1 | cpqDaSpareTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.4.1.1 | cpqDaSpareEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.4.1.1.11 | cpqDaSparePercentRebuild | CPQIDA-MIB |