All MIBs › CPQIDA-MIB › cpqDaPhyDrvSpinupTime
cpqDaPhyDrvSpinupTime
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvSpinupTime
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Spin up Time in tenths of seconds.
This is the time it takes for a physical drive to spin up to full speed.
Disks require time to gain momentum and reach operating speed. As cars are tested to go from 0 mph to 60 mph in x number of seconds, drive manufacturers have preset expectations for the time it takes the drive to spin to full speed. Drives that do not meet these expectations may have problems.
The value may be zero (0) under one of the following conditions:
* If you are monitoring a physical drive that is part of the monitored system's internal drive array storage, and you use a warm boot to reset the monitored system. During a warm boot, the drives continue to spin.
* If you are monitoring a physical drive in an ProLiant Storage System and you reset the monitored system but not the ProLiant Storage System.
What is cpqDaPhyDrvSpinupTime?
cpqDaPhyDrvSpinupTime reports, in tenths of a second, how long a physical drive takes to spin up to full operating speed. Manufacturers set expectations for this spin-up time, so a drive that takes noticeably longer than its peers in the same enclosure may have a failing motor or bearing. For example, if four drives in an array all spin up in about 3 seconds but a fifth reports 3900 tenths (39 seconds), that outlier is the one an admin should schedule for diagnostics.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.22 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvSpinupTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.22.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvSpinupTime.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvSpinupTime OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.22 | cpqDaPhyDrvSpinupTime | CPQIDA-MIB |