All MIBs › CPQIDA-MIB › cpqDaPhyDrvRecvWriteErrs
cpqDaPhyDrvRecvWriteErrs
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvRecvWriteErrs
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.19
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Recovered Write Errors.
This shows the number of write errors corrected through physical drive retries or recovered by a physical drive during the reference time (phyDrvRefTime).
Over time a disk drive may produce these errors.
If you notice an increase in the value shown for Hard Write Errors or Recovered Write Errors, a problem may exist with the drive.
The value increases every time the physical drive detects and corrects an error. Only an unusually rapid increase in these errors indicates a problem.
On average, these errors should occur less frequently than hard read errors. If you suspect that a problem may exist with the drive, schedule server down time to run diagnostics.
What is cpqDaPhyDrvRecvWriteErrs?
cpqDaPhyDrvRecvWriteErrs is the count of write errors that the physical drive corrected through retries during the reference time window. Since these recovered write errors occur on essentially all drives over time, admins watch for a sharp increase alongside hard write errors rather than the absolute value alone. As an example, a storage admin seeing this counter and cpqDaPhyDrvHardWriteErrs both trending upward on the same drive would flag it for replacement during the next maintenance window.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.19 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvRecvWriteErrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.19.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvRecvWriteErrs.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvRecvWriteErrs OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.19 | cpqDaPhyDrvRecvWriteErrs | CPQIDA-MIB |