All MIBs › CPQIDA-MIB › cpqDaPhyDrvReallocAborts
cpqDaPhyDrvReallocAborts
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvReallocAborts
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.34
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Physical Drive Reallocation Aborts.
The number of times the physical drive has failed due to an error that occurred when the controller was trying to reallocate a bad sector during the reference time (phyDrvRefTime). Zero (0) indicates that no Reallocation Abort errors have occurred. The value increases each time a Reallocation Abort error occurs.
Because of the nature of magnetic disks, certain sectors on a drive may have media defects. The reallocation area is part of the disk drive that is set aside to compensate for these defects. The array controller writes information addressed from unusable sectors to available sectors in the reallocation area.
If you suspect a problem, schedule server down time to run diagnostics verify a problem exists.
What is cpqDaPhyDrvReallocAborts?
cpqDaPhyDrvReallocAborts counts how many times a physical drive failed because of an error while the controller was trying to reallocate a bad sector during the reference time window. Because magnetic disks naturally develop occasional bad sectors that get remapped, a zero value is normal, but any increase means those remap attempts are themselves failing. As an example, an admin seeing this counter rise on a drive that already shows format errors would prioritize that drive for replacement, since both point to the same underlying media damage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.34 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvReallocAborts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.34.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvReallocAborts.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvReallocAborts OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.34 | cpqDaPhyDrvReallocAborts | CPQIDA-MIB |