All MIBs › CPQIDA-MIB › cpqDaPhyDrvNotReadyErrs
cpqDaPhyDrvNotReadyErrs
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvNotReadyErrs
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.33
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description:
Drive Not Ready Errors.
The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the spin up command was issued, the drive failed to reach its ready state. If the current value is zero, the drive has not failed. If the current value is greater than zero, at least one failure occurred.
This error could be caused because the physical drive has failed to spin.
If you suspect a problem:
1. Check the cables connecting the drive to ensure that they are intact.
2. If the cables are properly connected, schedule server down time to run diagnostics to verify that a problem exists.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.33 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvNotReadyErrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.33.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvNotReadyErrs.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.33 | cpqDaPhyDrvNotReadyErrs | CPQIDA-MIB |