All MIBs › CPQIDA-MIB › cpqDaPhyDrvMultipathAccess
cpqDaPhyDrvMultipathAccess
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvMultipathAccess
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.68
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Drive Array Physical Drive Multi-path Access Status.
This indicates if this physical drive has been configured to have and currently still has more than one I/O path to the controller. The following values are valid:
Other (1) Indicates that the instrument agent can not determine if this physical drive has multi-path access.
Not Supported (2) Indicates that multi-path access to this physical drive is not supported.
Not Configured (3) Indicates that the physical drive is not configured to have multi-path access.
Path Redundant (4) Indicates that the physical drive currently has more than one I/O path to the controller.
No Redundant Path (5) Indicates that the physical drive previously had more than one I/O path to the controller, but now has no redundant I/O path.
Drive Failed (6) Indicates that the physical drive has failed.
What is cpqDaPhyDrvMultipathAccess?
cpqDaPhyDrvMultipathAccess reports whether a physical drive is configured with, and currently still has, more than one I/O path to the controller: other, notSupported, notConfigured, pathRedundant, noRedundantPath, or driveFailed. This tells an admin whether a drive can survive the loss of one cable or connection path without becoming inaccessible. For example, if a drive that was pathRedundant switches to noRedundantPath, that signals one of its two access paths has gone down and needs repair before the remaining path also fails.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.68 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvMultipathAccess
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.68.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvMultipathAccess.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvMultipathAccess OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.68 | cpqDaPhyDrvMultipathAccess | CPQIDA-MIB |