All MIBs › CPQIDA-MIB › cpqDaPhyDrvFunctTest3
cpqDaPhyDrvFunctTest3
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvFunctTest3
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.25
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Functional Test 3.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new.
A percent value is displayed that represents how the drive works currently when compared to how the drive worked when new. New drives operate at the 100 percent level. By default, if the current value is less than or equal to 80 percent, a problem may exist.
If you suspect a problem, schedule server down time to run diagnostics to verify that a problem exists.
If the value cannot be determined, it is set to 4,294,967,295.
What is cpqDaPhyDrvFunctTest3?
cpqDaPhyDrvFunctTest3 is the third of the controller's built-in Gauge performance comparisons, again scored against a 100-percent new-drive baseline. Because it complements Functional Test 1 and Functional Test 2, a decline isolated to this test still gives an admin an independent signal that a drive's real-world performance is slipping. For instance, if Functional Test 3 alone drops from 100 to 80 percent on a drive, an admin would note the trend and plan a proactive replacement before it degrades further.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.25 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvFunctTest3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.25.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvFunctTest3.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvFunctTest3 OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.25 | cpqDaPhyDrvFunctTest3 | CPQIDA-MIB |