All MIBs › CPQIDA-MIB › cpqDaPhyDrvFunctTest2
cpqDaPhyDrvFunctTest2
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvFunctTest2
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.24
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Functional Test 2.
This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical drive currently operates when performing various tasks with the way it worked when it was new.
A percent value is displayed that represents how the drive works currently when compared to how the drive worked when new. New drives operate at the 100 percent level. By default, if the current value is less than or equal to 80 percent, a problem may exist.
If you suspect a problem, schedule server down time to run diagnostics to verify that a problem exists.
If the value cannot be determined, it is set to 4,294,967,295.
What is cpqDaPhyDrvFunctTest2?
cpqDaPhyDrvFunctTest2 is a second Gauge percentage from the controller's built-in comparison tests, again measuring current drive performance against new-drive performance with 100 percent as the baseline. Running multiple independent functional tests lets the controller catch different kinds of drive degradation, so a drop in this particular test even while Functional Test 1 stays healthy still points to a developing problem. As an example, an admin noticing Functional Test 2 alone sliding toward 70 percent would flag that specific drive for closer monitoring even if every other counter on it looks clean.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.24 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvFunctTest2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.24.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvFunctTest2.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvFunctTest2 OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.24 | cpqDaPhyDrvFunctTest2 | CPQIDA-MIB |