All MIBs › CPQIDA-MIB › cpqDaPhyDrvCurrentSpeed
cpqDaPhyDrvCurrentSpeed
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaPhyDrvCurrentSpeed
OID (numeric): 1.3.6.1.4.1.232.3.2.5.1.1.54
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Drive Array Physical Drive Current Data Transfer Speed.
The following values are defined:
other(1) The agent is unable to determine the current negotiated data transfer speed for this drive.
asynchronous(2) The negotiated data transfer speed for this drive is asynchronous.
fast(3) The negotiated data transfer speed for this drive is 10 million transfers per second).
ultra(4) The negotiated data transfer speed for this drive is 20 million transfers per second.
ultra2(5) The negotiated data transfer speed for this drive is 40 million transfers per second.
ultra3(6) The negotiated data transfer speed for this drive is 80 million transfers per second.
ultra320(7) The negotiated data transfer speed for this drive is 160 million transfers per second.
What is cpqDaPhyDrvCurrentSpeed?
cpqDaPhyDrvCurrentSpeed reports the negotiated SCSI data transfer speed for a physical drive, ranging from asynchronous up through ultra320. A drive negotiating a slower speed than its rated capability, such as fast instead of ultra320, points to a signal-quality problem on that connection dragging down performance. For instance, if one drive in an otherwise ultra320 array negotiates down to just fast, an admin would suspect a bad cable or connector on that specific drive before blaming the workload.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.54 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvCurrentSpeed
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.5.1.1.54.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaPhyDrvCurrentSpeed.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaPhyDrvCurrentSpeed OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5 | cpqDaPhyDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1 | cpqDaPhyDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1 | cpqDaPhyDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.5.1.1.54 | cpqDaPhyDrvCurrentSpeed | CPQIDA-MIB |