All MIBs › CPQIDA-MIB › cpqDaNw3xPollTime
cpqDaNw3xPollTime
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaNw3xPollTime
OID (numeric): 1.3.6.1.4.1.232.3.2.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Array Controller Driver Interface Poll Time.
If the Poll Type is Polled, this value shows how frequently, in seconds, the instrument agent requests Information from the device driver.
For example, if the Poll Type is Polled and the Poll Time is two, the instrument agent will poll the device driver every two seconds.
To change the Poll Time for NetWare, unload and then reload the instrument agent using the following commands:
UNLOAD CPQDSKSA LOAD CPQDSKSA [/Un]
The parameter /U specifies the frequency of updates in seconds. The variable n represents the number of seconds that the NLM should wait before collecting new data. The minimum value is one second. The maximum value is 300 seconds (five minutes).
What is cpqDaNw3xPollTime?
This integer, valid when the poll type is Polled, gives the number of seconds between the instrument agent's requests to the NetWare array driver for fresh data. An admin adjusts related NetWare load parameters (not this OID directly, per the description) to change how frequently statistics like read/write counters get refreshed. For example, a poll time of 2 means the agent refreshes drive-array statistics on that NetWare server every two seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.1.1.4 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaNw3xPollTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.1.1.4.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaNw3xPollTime.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaNw3xPollTime OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.1 | cpqDaInterface | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.1.1 | cpqDaOsNetWare3x | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.1.1.4 | cpqDaNw3xPollTime | CPQIDA-MIB |