All MIBs › CPQIDA-MIB › cpqDaManagedCableFaultCode
cpqDaManagedCableFaultCode
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaManagedCableFaultCode
OID (numeric): 1.3.6.1.4.1.232.3.2.2.3.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Managed Cable Fault Code.
The following values are defined:
Other (1) Indicates that the instrument agent can not determine the managed cable fault code.
None (2) Indicates that no cable fault codes have been reported.
Link Fault (3) Indicates that the cable is reporting a non fatal link fault.
No Communication With Cable's Management Interface (4) Indicates that Smart Array firmware could not communicate with the cable's management interface.
Cannot Configure Cable (5) Indicates that Smart Array firmware could not configure the cable and has disabled it.
What is cpqDaManagedCableFaultCode?
This enumerated value gives the specific reason behind a managed cable fault, such as Link Fault or No Communication With Cable's Management Interface. An admin consults this alongside cpqDaManagedCableStatus to get the precise root cause instead of just knowing a fault exists. For example, cpqDaManagedCableFaultCode reporting Link Fault tells the admin the physical signal link has degraded, distinct from a communication problem with the cable's own management chip.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.3.1.5 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaManagedCableFaultCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.3.1.5.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaManagedCableFaultCode.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaManagedCableFaultCode OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2 | cpqDaCntlr | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.3 | cpqDaManagedCableTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.3.1 | cpqDaManagedCableEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.3.1.5 | cpqDaManagedCableFaultCode | CPQIDA-MIB |