All MIBs › CPQIDA-MIB › cpqDaLogDrvRebuildBlks
cpqDaLogDrvRebuildBlks
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaLogDrvRebuildBlks
OID (numeric): 1.3.6.1.4.1.232.3.2.3.1.1.6
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Logical Drive Rebuild Blocks Remaining.
After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value shows how many blocks of data still need to be rebuilt. When the value reaches zero, the rebuilding process is complete. The drive array continues to operate in interim recovery mode while a drive is rebuilding.
When a logical volume is Expanding, the drive must redistribute the logical volume data across the physical drives. This value shows how many blocks of data still need to be redistributed. When the value reaches zero, the expand process is complete. The drive array continues to operate normally while the drive is expanding.
This value is only valid if the Logical Drive Status is rebuilding (7) or expanding (12).
What is cpqDaLogDrvRebuildBlks?
This Counter shows how many blocks of data still need to be rebuilt onto a replacement physical drive, reaching zero when the rebuild is complete, during which the drive array continues operating in interim recovery mode. An admin watches this counter trend toward zero to know when a logical drive will exit its vulnerable, degraded rebuild state. For example, cpqDaLogDrvRebuildBlks steadily decreasing after a failed disk swap tells the admin the array is progressing normally toward full redundancy restoration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.1.1.6 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvRebuildBlks
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.1.1.6.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvRebuildBlks.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaLogDrvRebuildBlks OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3 | cpqDaLogDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1 | cpqDaLogDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1.1 | cpqDaLogDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1.1.6 | cpqDaLogDrvRebuildBlks | CPQIDA-MIB |