All MIBs › CPQIDA-MIB › cpqDaLogDrvPercentRebuild
cpqDaLogDrvPercentRebuild
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaLogDrvPercentRebuild
OID (numeric): 1.3.6.1.4.1.232.3.2.3.1.1.12
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: Logical Drive Percent Rebuild.
After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value is the percent complete of the rebuild. When the value reaches 100, the rebuilding process is complete. The drive array continues to operate in interim recovery mode while a drive is rebuilding.
When a logical volume is Expanding, the drive must redistribute the logical volume data across the physical drives. This value shows how many blocks of data still need to be redistributed. When the value reaches one hundred (100), the expand process is complete. The array continues to operate normally while the drive is expanding.
When a logical drive's encryption state is transforming from unencrypted to encrypted or when the logical drive is being rekeyed with a new key, this value is the percent complete of the operation. When the value reaches 100, the transformation or rekey process is complete.
This value is only valid if the logical drive status is rebuilding (7), expanding (12), unencryptedToEncryptedInProgress(22) and newLogDrvKeyRekeyInProgress(23).
If the value cannot be determined or a rebuild is not active, the value is set to 4,294,967,295.
What is cpqDaLogDrvPercentRebuild?
This Gauge shows the percent complete of a rebuild after a failed physical drive was replaced, reaching 100 when finished, during which the array continues in interim recovery mode. An admin watches this to estimate remaining time in a vulnerable rebuild state and to confirm forward progress rather than a stalled rebuild. For example, cpqDaLogDrvPercentRebuild stuck at the same value for an extended period would prompt the admin to investigate whether the rebuild has stalled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.1.1.12 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvPercentRebuild
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.1.1.12.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvPercentRebuild.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaLogDrvPercentRebuild OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3 | cpqDaLogDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1 | cpqDaLogDrvTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1.1 | cpqDaLogDrvEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.1.1.12 | cpqDaLogDrvPercentRebuild | CPQIDA-MIB |