All MIBs › CPQIDA-MIB › cpqDaLogDrvCacheVolAccelCacheState
cpqDaLogDrvCacheVolAccelCacheState
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaLogDrvCacheVolAccelCacheState
OID (numeric): 1.3.6.1.4.1.232.3.2.3.5.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Drive Array Logical Drive Cache Volume Accelerator Cache State.
The current cache state of the cache volume.
The following values are defined:
Other(1) The instrument agent is unable to determine the cache state of this cache volume. You may need to upgrade the instrument agent.
Ok (2) Indicates that the cache volume is in normal operation mode and is fully functional.
Degraded (3) Indicates that this cache volume is currently degraded with limited functionality.
Cache Volume Offline(4) Indicates that the cache volume member is currently offline.
Logical Drive Offline(5) Indicates that the logical drive member is currently offline.
Never Configured(6) Indicates that the cache volume was never configured.
Flushing(7) Indicates that cache data is currently flushing from DDR cache.
Configuring(8) Indicates that cache is currently configuring.
Cache Configuration Failed(9) Indicates that cache configuration has failed.
What is cpqDaLogDrvCacheVolAccelCacheState?
This enumerated value reports the current operational state of the cache volume, such as Ok (normal, fully functional), cacheVolOffline, logDriveOffline, neverConfigured, or flushing. An admin checks this before trusting the cache hit/miss counters for a given cache volume, since a non-Ok state means the accelerator isn't actually operating normally. For example, cpqDaLogDrvCacheVolAccelCacheState reporting flushing tells the admin the cache is in the process of writing dirty data back to primary storage, likely before a planned shutdown or reconfiguration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.5.1.4 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvCacheVolAccelCacheState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.3.5.1.4.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaLogDrvCacheVolAccelCacheState.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaLogDrvCacheVolAccelCacheState OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3 | cpqDaLogDrv | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.5 | cpqDaLogDrvCacheVolumeAccelTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.5.1 | cpqDaLogDrvCacheVolumeAccelEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.3.5.1.4 | cpqDaLogDrvCacheVolAccelCacheState | CPQIDA-MIB |