CPQIDA-MIB :: cpqDaCntlrRebuildPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQIDA-MIBcpqDaCntlrRebuildPriority

cpqDaCntlrRebuildPriority

Module: CPQIDA-MIB

OID (symbolic): CPQIDA-MIB::cpqDaCntlrRebuildPriority

OID (numeric): 1.3.6.1.4.1.232.3.2.2.1.1.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Array Controller Rebuild Priority.

This is the controller's rebuild priority. The following values are valid:

other (1) Indicates that the instrument agent does not recognize the rebuild priority of the controller. You may need to upgrade the instrument agent.

low (2) The rebuild priority is low.

medium (3) The rebuild priority is medium.

high (4) The rebuild priority is high.

What is cpqDaCntlrRebuildPriority?

This enumerated value is the controller's priority setting — low, medium, or high — for how aggressively it dedicates I/O bandwidth to rebuilding a logical drive after a failed physical drive is replaced. An admin tunes this to balance faster fault-tolerance recovery against impact on production I/O performance during a rebuild. For example, an admin sets cpqDaCntlrRebuildPriority to high on a critical volume to minimize the time spent in a vulnerable, degraded state after a drive swap.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.23
snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrRebuildPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.23.1
snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrRebuildPriority.1

Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaCntlrRebuildPriority OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.3cpqDriveArrayCPQIDA-MIB
1.3.6.1.4.1.232.3.2cpqDaComponentCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2cpqDaCntlrCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.1cpqDaCntlrTableCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.1.1cpqDaCntlrEntryCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.1.1.23cpqDaCntlrRebuildPriorityCPQIDA-MIB