All MIBs › CPQIDA-MIB › cpqDaCntlrPartnerBoardStatus
cpqDaCntlrPartnerBoardStatus
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaCntlrPartnerBoardStatus
OID (numeric): 1.3.6.1.4.1.232.3.2.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Array Controller Partner Board Status.
The following values are valid:
other (1) Indicates that the instrument agent does not recognize the status of the controller. You may need to upgrade the instrument agent.
ok (2) The partner array controller is operating properly.
generalFailure (3) The partner array controller is failed.
cableProblem (4) The partner array controller has a cable problem. Please check all cable connections to this controller.
poweredOff (5) The array controller is powered off. Please replace the controller and restore power to the slot.
What is cpqDaCntlrPartnerBoardStatus?
This enumerated value reports the physical health of the partner controller's board in a duplexed pair, similarly distinguishing ok from generalFailure or cableProblem. An admin checks this specifically when troubleshooting a redundant configuration, since a failure here means the backup controller — not the active one — needs service. For example, if the active controller shows ok but cpqDaCntlrPartnerBoardStatus shows generalFailure, the admin knows redundancy has been lost even though production I/O continues uninterrupted.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.11 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrPartnerBoardStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.11.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrPartnerBoardStatus.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaCntlrPartnerBoardStatus OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2 | cpqDaCntlr | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1 | cpqDaCntlrTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1.1 | cpqDaCntlrEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1.1.11 | cpqDaCntlrPartnerBoardStatus | CPQIDA-MIB |