All MIBs › CPQIDA-MIB › cpqDaCntlrAccessModuleStatus
cpqDaCntlrAccessModuleStatus
Module: CPQIDA-MIB
OID (symbolic): CPQIDA-MIB::cpqDaCntlrAccessModuleStatus
OID (numeric): 1.3.6.1.4.1.232.3.2.2.1.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Array Controller RAID ADG Enabler Module Status.
The following values are valid:
other (1) Indicates that the agent does not recognize the RAID ADG Enabler Module status. You may need to upgrade the agent.
notSupported (2) Indicates that the RAID ADG Enabler Module is not supported on this type of controller.
notPresent (3) Indicates that the RAID ADG Enabler Module is not present or is not accessible.
badSignature (4) Indicates that the RAID ADG Enabler Module is present, but has an incorrect signature.
badChecksum (5) Indicates that the RAID ADG Enabler Module is present, but the checksum failed.
fullyFunctional (6) Indicates that the RAID ADG Enabler Module is present and fully functional.
upgradeFirmware (7) Indicates that the RAID ADG Enabler Module is present, but a firmware upgrade is required to make it fully functional.
What is cpqDaCntlrAccessModuleStatus?
This enumerated value reports the status of the RAID ADG Enabler Module (a hardware key enabling Advanced Data Guarding RAID), such as notPresent, badSignature, badChecksum, or fullyFunctional. An admin checks this when RAID 6 / ADG logical drives can't be created, since a missing or bad enabler module is a common cause. For example, cpqDaCntlrAccessModuleStatus reporting notPresent(3) explains to the admin why the option to create an Advanced Data Guarding logical drive is unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.18 snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrAccessModuleStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.1.1.18.1 snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaCntlrAccessModuleStatus.1
Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaCntlrAccessModuleStatus OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.3 | cpqDriveArray | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2 | cpqDaComponent | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2 | cpqDaCntlr | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1 | cpqDaCntlrTable | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1.1 | cpqDaCntlrEntry | CPQIDA-MIB |
| 1.3.6.1.4.1.232.3.2.2.1.1.18 | cpqDaCntlrAccessModuleStatus | CPQIDA-MIB |