CPQIDA-MIB :: cpqDaAccelWriteErrs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPQIDA-MIBcpqDaAccelWriteErrs

cpqDaAccelWriteErrs

Module: CPQIDA-MIB

OID (symbolic): CPQIDA-MIB::cpqDaAccelWriteErrs

OID (numeric): 1.3.6.1.4.1.232.3.2.2.2.1.8

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: Cache Module Board Write Errors.

This shows the total number of write memory parity errors that were detected while writing to the Cache Module board.

Write parity errors occur when the system detects that information has not been transferred to the Cache Module board correctly. A parity bit is included for each byte of information stored in memory. When the microprocessor reads or writes data, the system counts the value of the bits in each byte. If the total does not match the system's expectations, a parity error has occurred.

What is cpqDaAccelWriteErrs?

This Counter tracks the total number of write memory parity errors detected while writing to the Cache Module board, caught via a parity bit included with each byte stored. An admin watches this counter for the same reason as read errors — as an early hardware-health signal for the cache memory itself. For example, cpqDaAccelWriteErrs increasing alongside rising board temperature readings points the admin toward a cooling or hardware issue affecting that cache module.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.2.1.8
snmpwalk -v2c -c public <target> CPQIDA-MIB::cpqDaAccelWriteErrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.232.3.2.2.2.1.8.1
snmpget -v2c -c public <target> CPQIDA-MIB::cpqDaAccelWriteErrs.1

Start monitoring Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQIDA-MIB::cpqDaAccelWriteErrs OID value, configure state conditions and alerts, and monitor any Compaq/HP ProLiant server (Smart Array/Intelligent Drive Array RAID controller) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.232compaqCOMPAQ-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.232.3cpqDriveArrayCPQIDA-MIB
1.3.6.1.4.1.232.3.2cpqDaComponentCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2cpqDaCntlrCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.2cpqDaAccelTableCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.2.1cpqDaAccelEntryCPQIDA-MIB
1.3.6.1.4.1.232.3.2.2.2.1.8cpqDaAccelWriteErrsCPQIDA-MIB