All MIBs › CPQHLTH-MIB › cpqHeResMem2BoardErrorStatus
cpqHeResMem2BoardErrorStatus
Module: CPQHLTH-MIB
OID (symbolic): CPQHLTH-MIB::cpqHeResMem2BoardErrorStatus
OID (numeric): 1.3.6.1.4.1.232.6.2.14.12.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The error status of the Advanced Memory Protection board or Cartridge or riser.
The following status values are supported:
other(1) The value is unsupported or could not be determined.
noError(2) The board or cartridge or riser is configured and operating correctly.
dimmEccError(3) The board or cartridge or riser has at least one DIMM ECC error.
unlockError(4) The board or cartridge or riser is unlocked when it should not be. Please insure the board of cartridge is locked.
configError(5) The board or cartridge or riser has a bad memory configuration. Please insure all memory modules are of the correct type, speed, latency, etc.
busError(6) The board or cartridge or riser has a memory bus error. Please insure all memory modules are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
powerError(7) The board or cartridge or riser has power error. Please insure all memory modules are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
advancedEcc(8), The board or cartridge or riser is configured for advanced Ecc mode.
onlineSpare(9), The board or cartridge or riser is configured for Online Spare mode.
mirrored(10), The board or cartridge or riser is configured for mirrored mode.
mirroredDimmError(11), The board or cartridge or riser has a mirrored Dimm error.
memoryRaid(12), The board or cartridge or riser is configured for memory raid mode.
raidDimmError(13) The board or cartridge or riser has a raid Dimm error.
lockStep(14), The board or cartridge or riser is configured for lockStep mode.
lockStepError(15) The board or cartridge or riser has a lockStep Dimm error.
What is cpqHeResMem2BoardErrorStatus?
This read-only enumerated value reports the specific error status of this board, cartridge, or riser, such as a DIMM ECC error, matching the original table's error categories. It gives an admin the same precise error categorization as the original board table, extended to riser hardware. A DIMM ECC error here on a specific riser points the admin at that riser's DIMMs rather than the board's bus or power connections.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.6.2.14.12.1.6 snmpwalk -v2c -c public <target> CPQHLTH-MIB::cpqHeResMem2BoardErrorStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.6.2.14.12.1.6.1 snmpget -v2c -c public <target> CPQHLTH-MIB::cpqHeResMem2BoardErrorStatus.1
Start monitoring HP/Compaq ProLiant server (hardware health MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQHLTH-MIB::cpqHeResMem2BoardErrorStatus OID value, configure state conditions and alerts, and monitor any HP/Compaq ProLiant server (hardware health MIB) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.6 | cpqHealth | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2 | cpqHeComponent | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.14 | cpqHeResilientMemory | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.14.12 | cpqHeResMem2BoardTable | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.14.12.1 | cpqHeResMem2BoardEntry | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.14.12.1.6 | cpqHeResMem2BoardErrorStatus | CPQHLTH-MIB |