All MIBs › CPQHLTH-MIB › cpqHeOsCommonPollFreq
cpqHeOsCommonPollFreq
Module: CPQHLTH-MIB
OID (symbolic): CPQHLTH-MIB::cpqHeOsCommonPollFreq
OID (numeric): 1.3.6.1.4.1.232.6.2.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Insight Agent's polling frequency.
The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval.
If the poll frequency is 0 all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance.
What is cpqHeOsCommonPollFreq?
This read-write integer (0-65535) is the number of seconds between the Insight Agent's polls of the underlying device driver, where a value of zero means the agent only fetches data on demand and all writes to this object fail while it is zero. An admin tunes this to trade off how current health readings like fan speed or temperature are against the overhead of frequent polling. Setting cpqHeOsCommonPollFreq to 30 makes the agent refresh its data roughly every half minute instead of only when a management station asks.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.6.2.1.4.1 snmpwalk -v2c -c public <target> CPQHLTH-MIB::cpqHeOsCommonPollFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.6.2.1.4.1.1 snmpget -v2c -c public <target> CPQHLTH-MIB::cpqHeOsCommonPollFreq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.6.2.1.4.1.1 i <value>
Start monitoring HP/Compaq ProLiant server (hardware health MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQHLTH-MIB::cpqHeOsCommonPollFreq OID value, configure state conditions and alerts, and monitor any HP/Compaq ProLiant server (hardware health MIB) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.6 | cpqHealth | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2 | cpqHeComponent | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.1 | cpqHeInterface | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.1.4 | cpqHeOsCommon | CPQHLTH-MIB |
| 1.3.6.1.4.1.232.6.2.1.4.1 | cpqHeOsCommonPollFreq | CPQHLTH-MIB |