All MIBs › CPQFCA-MIB › cpqFcaSparePercentRebuild
cpqFcaSparePercentRebuild
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaSparePercentRebuild
OID (numeric): 1.3.6.1.4.1.232.16.2.4.1.1.5
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: External Array Spare Percent Rebuild.
If the spare status is building(5), then this is percent complete of of the rebuild.
The data contained on the failed physical drive must be reconstructed from the fault tolerance data and copied to the spare so that the spare can function in place of the failed drive.
When the number reaches one hundred (100), the building process is complete and the spare has replaced the physical drive.
If the value cannot be determined or a rebuild is not active, the value is set to 4,294,967,295.
What is cpqFcaSparePercentRebuild?
This gauge shows the percent-complete progress of reconstructing data onto a spare drive that is in the building state, reaching 100 when the spare has fully replaced the failed drive. An admin watches this to track how close automatic data recovery is to completing after a physical drive failure triggered spare activation. For example, a value stuck at 15 for an extended period would suggest the rebuild onto the spare is progressing unusually slowly or has stalled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.4.1.1.5 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaSparePercentRebuild
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.4.1.1.5.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaSparePercentRebuild.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaSparePercentRebuild OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.4 | cpqFcaSpareDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.4.1 | cpqFcaSpareTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.4.1.1 | cpqFcaSpareEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.4.1.1.5 | cpqFcaSparePercentRebuild | CPQFCA-MIB |