All MIBs › CPQFCA-MIB › cpqFcaPhyDrvUnsupportedDrive
cpqFcaPhyDrvUnsupportedDrive
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaPhyDrvUnsupportedDrive
OID (numeric): 1.3.6.1.4.1.232.16.2.5.1.1.58
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Physical Drive Unsupported Drive.
The following values are defined:
other(1) The agent is unable to determine the value for this drive.
supported(2) The drive is supported.
unsupported-SinglePorted(3) The drive is unsupported. A single ported drive has been detected in a dual port only configuration.
unsupported-SATA(4) The drive is unsupported. A SATA drive has been detected in a SAS only configuration.
unsupported-TooSmall(5) The drive is unsupported. A drive that is too small has been detected.
What is cpqFcaPhyDrvUnsupportedDrive?
This enumerated value reports why a drive is unsupported in its current configuration, as other, supported, unsupported-SinglePorted, unsupported-SATA, or unsupported-TooSmall. An admin uses this specific reason code to understand exactly why a newly inserted drive is being rejected by the array, rather than guessing. For example, unsupported-SinglePorted(3) tells the admin a single-ported drive was installed into a slot that requires dual-port drives for a redundant configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.58 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvUnsupportedDrive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.58.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvUnsupportedDrive.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaPhyDrvUnsupportedDrive OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5 | cpqFcaPhyDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1 | cpqFcaPhyDrvTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1 | cpqFcaPhyDrvEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1.58 | cpqFcaPhyDrvUnsupportedDrive | CPQFCA-MIB |