All MIBs › CPQFCA-MIB › cpqFcaPhyDrvStatus
cpqFcaPhyDrvStatus
Module: CPQFCA-MIB
OID (symbolic): CPQFCA-MIB::cpqFcaPhyDrvStatus
OID (numeric): 1.3.6.1.4.1.232.16.2.5.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: External Array Physical Drive Status.
This shows the status of the physical drive.
The following values are valid for the physical drive status:
other (1) Indicates that the instrument agent does not recognize the drive. You may need to upgrade your instrument agent and/or driver software.
unconfigured (2) Indicates the drive is present, but is not part of any logical drive configuration.
ok (3) Indicates the drive is functioning properly.
thresholdExceeded (4) Indicates that the drive has a threshold exceeded error and should be replaced.
predictiveFailure (5) Indicates that the drive has a predictive failure error and should be replaced.
failed (6) Indicates that the drive is no longer operating and should be replaced.
unsupportedDrive(7) Indicates that an unsupported drive has been detected and should be replaced. See cpqFcaPhyDrvUnsupportedDrive for more details.
What is cpqFcaPhyDrvStatus?
This enumerated value reports a physical drive's health state, such as other, unconfigured, ok, threshExceeded, predictiveFailure, failed, or unsupportedDrive. This is the primary field an admin polls to catch a disk before it fully fails, since predictiveFailure(5) gives advance warning that a drive should be proactively replaced. For example, seeing threshExceeded(4) would prompt scheduling a replacement even though the drive is still technically operating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.6 snmpwalk -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.16.2.5.1.1.6.1 snmpget -v2c -c public <target> CPQFCA-MIB::cpqFcaPhyDrvStatus.1
Start monitoring Legacy Compaq Fibre Channel Array (CPQFCA) storage controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQFCA-MIB::cpqFcaPhyDrvStatus OID value, configure state conditions and alerts, and monitor any Legacy Compaq Fibre Channel Array (CPQFCA) storage controller from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.16 | cpqFibreArray | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2 | cpqFcaComponent | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5 | cpqFcaPhyDrv | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1 | cpqFcaPhyDrvTable | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1 | cpqFcaPhyDrvEntry | CPQFCA-MIB |
| 1.3.6.1.4.1.232.16.2.5.1.1.6 | cpqFcaPhyDrvStatus | CPQFCA-MIB |